Top 5 Projector Screens of 2019
There are many things to consider when buying a projector: viewing distance, projector placement or ideal projector distance, throw distance, and if you plan to use a projector screen. We’re here to help you answer that last consideration.
If you want better quality images, then that answer should be yes and should be followed by: Which projector screen should I choose?
Projector screens can be fixed or retractable, large or small, white or some form of gray, budget or high end, etc. There are many things to consider with projector screens from the screen material to its aspect ratio to if it’s good for 4K or not.
Whether you want a cheap screen, the best overall, one for gaming, or even one for your classroom, we’re here to help you narrow your choices to the best projector screens out there; followed by our extensive Buyer’s Guide and FAQ to help you choose the best projector screen for you.
Now, let’s get on to our top 5 projector screens of 2019.
Projector Screen Reviews - Our Top 5 Picks
1. Best All-Around: Elite Screens Spectrum Electric Motorized Projector 100”

Specifications:
- L x W x H → 100.2 in x 3.1 in x 61.1 in
- Weight → 21.9 lbs
- Motorized
- Screen Size → 100 in
- Aspect Ratio → 16:9; 2.35:1 at 95” diagonal
- Gain → 1.1 or 1.0
Key Features
- All steel construction
- Design Options (White or Black housing; 4:3, 16:9, or 16:10)
- Plug and Play ready with IR remote
- Max White or Acoustic Pro UHD screen material options
- 180-degree viewing angle
- Active 3D, 4KUHD, and HDR Ready
- Black masking borders enhance picture contrast
- Black Backed to Prevent Light Penetration/Loss
- Mildew Resistant and Easy to Clean
PROS
CONS
Elite Screens Spectrum Electric Motorized Projector 100” Review
The Elite Screens Spectrum Electric Motorized 100” Projector is an amazing all-around projector screen. If you’re looking for a motorized projector screen, then this is a great option.
This screen is very easy to clean, made of all steel construction with mildew resistance. It comes black-backed, preventing light penetration and loss, and has black masking borders to enhance picture contrast.
It is “plug and play” ready with a nice IR remote, so as soon as it’s plugged in, you can use it. While it’s slow to raise and lower, it is quiet. The only bad thing about this is its short power cord, but this can be fixed with an extension cord.

This screen gives you a lot of choices such as between its Max White or Acoustic Pro UHD screen materials. The Max White screen has a 1.1 gain, and the Pro UHD a 1.0.
Regardless, you get a 180-degree viewing angle. You can also choose between white or black housing and whether you want it in a 4:3, 16:9, or 16:10 aspect ratio when you buy it.
If you want to watch/play 4KUHD, HDR, Active 3D, or Full HD movies and video games then this is a great option. Pictures really look great on this screen. The best part is that this screen affordable and great for its value of $210.
There are faults with this screen. Those who don’t like it say, “you get what you paid for,” most likely because Amazon often sends damaged screens and boxes and its edges also fold inwards over time.
This screen is great for 4K and 3D lovers and anyone looking for a strong motorized all-around screen for gaming and movies.
If you're one of those people, check out our guides on the best 4k projectors and the best 3D projectors to pair it up with this amazing screen.
2. Best for Home Theater: Silver Ticket STR-169120

Specifications:
- L x W x H → 109.25 in x 1.25 x 63.63 in
- Weight → 31.8 lbs
- Fixed
- Screen Size → 120 in
- Aspect Ratio → 16:9
- Gain → 1.1
Key Features
- Active 3D and Full HD compatible
- 160-degree viewing angle
- Quick and easy to assemble
- Wall-mountable
- 4K recommended
- 1.1 gain
- Made with durable extruded aluminum
PROS
CONS
Silver Ticket STR-169120 Review
An amazing home theater screen, and the most popular screen out there today is the Silver Ticket STR-169120. If you’re looking for a screen that is good for Active 3D, Full HD, and 4K, then this is a great one for you.
The STR-169120 is 120” and wall-mountable. It has a 160-degree viewing angle with no viewing loss and a 1.1 gain.
It is made with a white, stretchy high-quality vinyl material and durable extruded aluminum that makes it very durable and amazing in both its screen and picture quality. Some people find wrinkles in the screens, but the wrinkles fall out for most.

This screen is huge and great for any home theater with its movie-like experiences, but it comes at an expensive $250.Sadly, that’s not its biggest issue, that’s its set up.
Silver Ticket Products claims it’s quick and easy to set up this screen. While most agree, this is not always true.
The 169120 comes with very cheap and low-quality pieces, especially screws and plastic rods and its tension bar is very hard to get on.
Some find the whole setup process as very complicated; it doesn’t help that the instructions are very bad.
Still, this screen is a great value for its price. If you want movie-like immersion and experiences and a great home theater projector, then this is a great screen to look at.
Other popular options are the STR-169100 and -169110, which are 100” and 110” respectively. They’re cheaper, but not as upheld as the 169120.

3. Best High End: Silver Ticket Products STR-169150

Specifications:
- L x W x H → 109.25 in x 1.25 x 63.63 in
- Weight → 31.8 lbs
- Fixed
- Screen Size → 120 in
- Aspect Ratio → 16:9
- Gain → 1.1
Key Features
- 1.1 gain
- 160-degree viewing angle
- Full HD, Active 3D, 4K Ready
- Easy to assemble
- Black-Backed
- Color balance, better contrast, and better tension providing
- Wall-mountable
- Wrapped in light-absorbing, black velvet material
- Tension design makes 100% wrinkle free
PROS
CONS
Silver Ticket Products STR-169150 Review
A 4K projector needs a just as great 4K screen. The STR-169150 is that screen for you. While very pricey, this is one of the best projector screens out there today.
It’s Full HD, Active 3D, and 4K ready with 1.1 gain and a 160-degree viewing angle. There’s a lot to enjoy about this screen.

Despite its long 30-40 minute set-up and its hard to put in tension bar, it’s very easy to assemble. This screen is wall-mountable and fixed with a sturdy, heavy-duty aluminum frame wrapped in light absorbing black velvet material.
Its material quality is astounding compared to many others, and when it’s up it looks amazing. The tension is even great with a 100% wrinkle-free design.
The best part of this is its picture quality. Not only does it support Full HD, Active 3D, and 4K, but it gives better contrast and color balance and even works great with 4K HDR.
Pictures truly look amazing on this screen. This is one of the best screens out there and is worth its steep price.

4. Best Budget: Best Choice Products 119” (SKY1182)

Specifications:
- L x W x H → 92.5 in x 4.75 in x 74.5 in
- Weight → 18.9 lbs
- Pull-Down, Fixed
- Screen Size → 119 in
- Aspect Ratio → 1:1
- Gain → 1.1
Key Features
- Wall-Mounted pull-down
- 1.1 high gain
- 160-degree viewing angle
- Great for brighter images, even in lit rooms with higher ambient light
- Black-backed white matte screen for sharper, clearer, more dynamic images
- Anti-acid, anti-static, durable mildew and dust resistant fabric
- Easy set-up
PROS
CONS
Best Choice Products 119” Review
At a little more than $50, Best Choice Products 119” projector screen is a wall-mounted pull-down projector screen that is great whether you plan to use it outside, in your home theater, or in a classroom at a meeting, or anywhere else.
The Best Choice Products 119” is very easy to set up and is very smooth going up and down. It has a 1.1 high gain and a 160-degree viewing angle.

This screen is large with white matte material. It’s black-backed with anti-acid, anti-static, durable mildew and dust resistant fabric. Its screen quality has both been referred to as sturdy and “eh,” or good for its price.
Its screen quality is easily outdone by its picture quality. Its material allows for sharper, clearer, brighter, and more dynamic images that are great in even high ambient light whether you plan to watch movies or play video games.
The biggest problem with this screen is that it has a square 1:1 aspect ratio. It also commonly comes beat up, damaged, and/or the wrong size.
If you’re fine with a square screen and want something great for any environment, including those with high ambient light, then you’ll love this screen.
5. Best Gaming: P-Jing 120”

Specifications:
- L x W x H → 104 in x 0.1 in x 58 in
- Weight → 2.15 lbs
- Portable / Fixed
- Screen Size → 120 in
- Aspect Ratio → 16:9
- Gain → 1.1
Key Features
- Anti-Crease - No wrinkles or creases
- Foldable and Portable
- Front and Rear Projection Screen
- Universal Application - outside, conference room, home theater, etc.
- 160-degree viewing angle
- 2.2 lbs with thickened matte material
- 1080p Full HD and 3D ready
- Very easy to install
PROS
CONS
P-Jing 120” Review
If you’re looking for a projector screen that’s good for gaming, then you’ll enjoy the P-Jing 120”. This is a foldable and portable projector with a lot of promise at a cheap price.
Even if you’re not a gamer, you can bring and use the P-Jing with you anywhere with its mostly universal application.
Projector screens better your gaming experiences by boosting your picture quality and adjusting your brightness. Most video games are made in 1080p, so if you’re looking for a good screen for gaming it’s necessary to have a projector that is at least good for Full HD.
A good gaming screen needs a great gaming projector. We go over the best of those here.
The P-Jing is Full HD and 3D ready with a 160-degree viewing angle. It’s anti-crease (wrinkle and crease-free), but there are wrinkles due to shipping that can be fixed by placing a heavy object on them.
Using sticky adhesives, it’s very easy to install. Most people find it thick and nice to project onto with dual rear and front projection.
It’s made of a thick matte material beautiful to project onto, but it has also been compared to being “just a flat white sheet” and is called very thin and transparent and not an “actual screen.”
Yet, even those who don’t like it said it worked well and was great for its value with very good overall picture quality.

Best Projector Screen: Buying Guide
There’s a lot to cover when it comes to buying a projector screen. We cover everything here for you.
Screen Size and Viewing Distance - How to Choose a Projector Screen Size
It’s not always true that bigger is better. You don’t want to just choose the biggest screen that you can get to fit your wall because it will affect your seating/viewing distance, brightness, clarity, and overall picture quality.
A large, overwhelming picture can also possibly give you headaches, fatigue, and more since your eyes are trying to take it all in.
Nowadays, screens around 100” - 120” are the most popular. Regardless, you’re going to want to measure the length, width, and height of your room to see not only if a screen can fit on the wall but also how far you’ll be able to see it from.

If you plan to have a dedicated theater room with rows of chairs, you’re going to want to make sure everyone can see the bottom of the screen. If you can’t see the bottom of the screen past the first row and each subsequent row, you’ll probably want a smaller screen.
You need to make sure that even your farthest viewer can see the screen clearly. Even if you don’t have rows of chairs, you want to make sure that everyone can see the screen from your furniture in the room.
A big thing that will limit your screen choices is your projector’s throw ratio: the ratio of the distance from the lens to the screen, otherwise known as throw.
A projector’s throw will determine the size of the picture at a certain length from the screen, and this is something needed to be considered that will determine how far you hang a projector from the screen as well as how large your screen should be.
Viewing distance is just as important to prevent you from getting headaches and to allow you to see everything. The size of your screen will determine how far away you sit from it.
This short video covers several things to know when it comes to buying a projector screen:
One of these is the general rule of thumb for 1080p and 4K projectors. This is rule says that you should sit 1-½ times the screen diagonal away from the screen if you have a 1080p projector and 1 times the screen diagonal if you have a 4K projector.
Let’s say you have a 96” diagonal. With a 1080p projector, you should sit 12 feet from the screen, and with a 4K projector, you should sit 8 feet from the screen.
Viewing distance is, of course, subjective since some people like to sit closer and others farther, so do what suits you in the end.

Aspect Ratio
The next part to your screen size is its aspect ratio: the ratio of your screen’s width to its height. There are many aspect ratios out there but we’ll just be discussing five: 4:3, 16:9, 16:10, 2.35:1, and 1:1.
The most common aspect ratios are 16:9 and 4:3 and most projectors come in 16:9. You’re most likely going to want a screen that matches your projector’s native aspect ratio.

4:3 is the traditional TV and computer screen ratio. This is a video format aspect ratio good if you’re switching between full and widescreen. It usually comes with XGA, SXGA+, UXGA, and QXGA resolution projectors.
16:9 is the most common ratio. This is the widescreen ratio that is used with HDTV. If you plan to use a 4K or HD projector, you’ll probably want this aspect ratio.

16:10 is a PC widescreen aspect ratio for multimedia HD-like projectors that use WXGA and WUXGA resolutions. These are good for presentations but have been on the rise for home theater use.

2.35:1 is referred to as Cinemascope and is the widescreen cinema standard, though 2.40:1 is also a popular choice. If you want to truly create a cinematic environment for your home theater, then this ratio will give you the biggest image possible and the most immersive.

1:1 is a square aspect ratio. These are generally used for overhead projectors and presentations. A plus for them is that multiple aspect ratios can be used on this depending on the screen height.
Screen Types: Fixed vs. Retractable
Your next big choice is whether you plan for your screen to be fixed or retractable.

A fixed-frame allows you to get more tension, flatness, and smoothness out of your screen because the material is stretched over a tension bar and isn’t being rolled up or down. These screens are fixed in place off of an anchor or bracket on the wall and are more popular.
They are easier to install than retractable screens and can be mounted permanently on the wall. They’re usually flat and smooth but can also come curved to create a more panoramic like experience to immerse you in.
Retractable screens, on the other hand, can be manual or motorized. These screens can be wall or ceiling mounted, ceiling-recessed, and more. They’re retractable, being able to be pulled up or down.
This is good if you don’t always want to have to see a screen there and have it blocking space. That and motorized screens are pretty cool. These screens are generally more expensive, not as flat, and harder to install.
Motorized screens are the most expensive screens. They’re larger and are really good for ease of use since they can easily retract your screen with the flick of a switch or the press of a button.
These screens are electric, making them harder to install, and descend when demanded. You can even program them to descend when you turn on your projector.
They are often categorized as “non-tension,” the screen standard, since the screen hangs loosely and isn’t flush against a mount or wall.

Manual screens are smaller and less expensive than their motorized brothers. These are the screens you saw at school that are pulled down by a cord. There are other types of manual screens other than just pull-down, and these types are all portable: tripod, folding, floor, and tabletop.

Tripod uses a pull-down screen on a tripod (go figure) and have a slightly longer case than the screen it uses.

Folding screens are the most portable. They are the largest and are generally used outside, in auditoriums, and in other larger environments. They are attached to a frame or truss when put up and you can easily swap screen material with them.
Floor or floor-rising screens are like tripod screens except without the tripod and can be manual or motorized. They’re lightweight and don’t require much, if any, assembly. The screen is risen off the floor by a layer of black at its bottom.

Tabletop screens are small, very portable screens that are usually used with pico projectors. Some rise like floor-rising screens and some are extended and pulled apart like accordions.
Tension vs. Non-Tension
There are three types of tension when it comes to projector screens: tension, non-tension, and tab-tension.
Tensioned surfaces keep your screen tight, flat, and steady and reduce your screen’s chances of having imperfections like ripples and creases. These surfaces are smoother, reflect light better, and keep your image more in focus. These are found in Fixed screens.
Retractable screens are quite different. They’re mostly non-tensioned. Non-tensioned screens hang loosely and freely and have the possibility of more minor imperfections happening, such as curled edges, waves, creases, etc. This doesn’t mean that they will happen.
Tab-tensioned screens were created to fix that possibility. Tab-tensioning uses a cable-and-tab system to keep retractable screens as taut as possible. This helps retractable screens better their quality and come as close to a fixed screen’s image quality as possible.
Overall, tensioned surfaces are the better option because they keep your image flat, make imperfections less possible, and are better for resolution, light reflection, and picture and screen quality.
Screen Material: Texture, Gain vs. Viewing Angle, and Color
When it comes to choosing your screen material you have three things to choose between: Texture, Gain, and Color.
Texture
There are two types of texture when it comes to projector screens: smooth and gritty.
If you’re using resolution up to 1080p, get a smooth screen. These screens show great detail with HD.
If you’re using 4K, get a gritty screen. These screens have more texture, also referred to as “grit,” and are better able to bring out 4K images.
Gain
Every screen has gain: the amount of light that a screen material’s fabric reflects back at the viewer. This measurement is taken from where light is reflected perpendicular from the surface. For most projectors you’re going to want a gain around 1.0 to 1.3.
The gain of 1.0 gives the same uniform brightness all-around and reflects the same amount of light. Gain higher than that means that the screen material increases the brightness of the center a projected image, which helps when you have a not bright projector.
Gain lower than 1.0 means that the projected image isn’t as bright, while higher than 2.0 means it’s very bright and should only be used for projectors that aren’t bright - like pico projectors.
The higher gain you have, the more light is reflected off of the surface’s center, creating a hot-spot on your screen where your picture is brighter in its center while its sides are dim. This is called “hot-spotting.”
Gain also impacts your viewing angle - the maximum angle from the screen’s center that you can see a good image. The higher the gain, the lower the viewing angle.
Color
You have three options when it comes to your screen’s color: white, gray, and black.
White screens are the most commonly used and are the industry standard. They are the brightest screens but aren’t great with contrast. If you have control over your ambient light or a very or perfectly dark room, then get a white screen. They work in the darkest environments. If you can use a white screen, use it.

Gray screens are referred to as “high-contrast” screens. They are great for contrast and good to use in rooms with ambient light. These screens bring darker blacks and darker tones overall.
While the whites remain white, these screens require better projectors to bring better whites, lighter colors, and higher brightness.

Black screens aren’t as common or known of. They have great, deep blacks and perform great in fully lit rooms.

Acoustically Transparent Screens
There are other screens to consider depending on what you want to do. If you’ve ever wondered where movie theaters put their speakers, then it’s time you’ve learned the answer. They’re behind the speaker. Acoustically transparent screens, also called perforated or “perfs,” have tiny holes in the screen which allow you to “hide” your speakers behind your screen. If you sit up close, you may notice the holes, but from far enough away you should be fine.

Rear and Dual Projection
Rear projection gives you exactly what you think it does - allows you to project onto the screen from behind. Generally, you can do this with any screen, but some screens are better and more suited than others.
There are also dual screens which allow you to project from both the front and back if that interests you as well.
Full HD, 3D, 4K, and 8K
In general, you do not need a specific screen for any of these. Most screens nowadays are for HD, but there are HD fabrics out there which help to do certain things like handle ambient light, better color and image quality, and more.
For 4K and 8K, get a screen known for doing well with these. There’s been nothing to distinguish that a certain screen material is better for a certain resolution yet, though. So, just get a gritty texture and you should be fine.
Bigger screens are also better for 4K to see its details more efficiently. You’ll also want a screen that is great for image quality.
If you want the best 4K images, then you’re going to need both a great 4K projector and a great screen.
The only time you’ll need special material is for 3D if you’re using two projectors - one for the right eye and one for the left - which some projectors do nowadays.
If you’re looking for 3D projector screens, then also look for 5D screens. 5D screens come from their ability to do 2D and 3D, 2+3+5… yeah, look for them.
Screen Accessories
Screen accessories aren’t always needed, but many people like to have them or at least know their choices.
Some accessories make your screen look more pleasing, some absorb more light, protect the screen’s surface, and much more. Honestly, this is all up to your discretion.
Some accessories come with the screen such as mounting brackets, screws, remotes, cables, motors, and more.
Any other mechanical-like screen accessories are up to you. Other accessories are drapery, woven-ware, carrying cases, and more.
Where can you use it: Outdoors, Conference Room, Home Theater, etc.
What screen you get depends on where you can use it. There are certain screens that are better for certain places, such as a portable screen or retractable screen for a meeting or classroom.
Some screens are better for your home theater than others.
It’s important that you know what you want to use your screen for/if you’re planning to move it around often before settling on one that may not be able to give you what you want.
Many people really want to lounge outside and watch movies. We actually have the best outdoor screens here.
What Projectors Should You be Looking For?
This is the most important piece of the puzzle. Your projector choice is determinant on every choice that you took for your screen and vice versa. Is it white or gray? How high is the gain? What is its aspect ratio? Texture? Size?
There are a lot of things to consider so that you can match projector to screen and make them both great for each other. You don’t want a dim projector on a gray screen or a 2.35:1 projector on a 16:9 screen. You want things to match up.
Frequently Asked Questions
There are many questions around projector screens from screen material to color to how to wash it. We answer several here.
What is the best projector screen material?
There isn’t a singular “best” projector screen material. There are many choices though.
Overall, many find the material that Silver Ticket Products uses as the best - being a high-quality, very durable, mildew-resistant, easy-to-clean screen.
Those which allow 4KUHD, such as the Acoustic ProUHD of STR-169120, are loved just as much, if not better.
You want to look for a mildew- and flame-resistant, wrinkle-free, great tensioned screen with some type of blackout material and excellent picture quality.
What screen color is the best?
This depends on your environment.
White is the best choice if you have control of the light in your environment or a dark room with no ambient light, but you’ll also want a high contrast projector with this.
If your projector is very bright or you have ambient light, you’re going to want a darker screen.
Black screens are great if you have a lot of ambient light, but there aren’t many of them.
Gray screens are great for contrast and absorb ambient light better than white screens without losing any black level. With a gray screen, blacks are better and deeper than white screens and whites remain white.
If you have a room that isn’t dark, then you’re going to want a gray screen to absorb any light. You’ll want a brighter projector if you have a gray screen.
Is a projection screen necessary?
This is a very common question. No, a screen is not necessary, but it’s obviously better if you have one.
There are two (well, kinda three) options with projecting images. You can either project them on a screen or a wall.
With the wall, you can project it just on your regular wall (preferably white) or a specially painted wall just for your projector using a specific coating.
Your pictures will look nowhere near as good on a white wall compared to a screen or a specially painted wall.
You can paint the wall with projector screen paint, which will make it brighter and a more reflective surface and better for projections, but this is still not as good as a screen, especially if you encounter an uneven wall.
There have been many cases where a seemingly flat and smooth wall is not that. This will mess up your image. If you want to use a wall, still, make sure it is smooth and flat and painted with high-quality paint.
Some paints nowadays are even great for 4K images. We suggest to paint or build a black frame around where you plan your projected image to be if you want to use a wall.
A screen is better. A screen not only is reflective and made for images, but it can also increase contrast, brightness, color saturation, sharpness, and overall picture quality. The frame around the screen is just as important, helping to absorb light and boost quality.
Can you make a projector screen?
You most definitely can make a projector screen. You can make a cheap projection screen pretty easily nowadays with the right tools and material. Here’s a video to help you out:
We also go over how to make outdoor theater projector screens here.
How do you clean a projector screen? Can you wash it?
This depends on the screen material. And, to get it out of the way, no, don’t wash it.
In general, you want gloves, something soft and non-abrasive, cloth or brush, to clean with (Silver Tickets recommends a magic eraser or a toothbrush), mild detergent, isopropyl alcohol, and maybe a can of compressed air and tape.
You’d use the air and tape to GENTLY get the dust off, then warm water and that soft material, such as a microfiber cloth, to clean the screen with light pressure. If the water isn’t enough, use a little bit of mild detergent dish soap and mix it with the water. Don’t scrub too hard or you can damage the screen.
You’ll want to wipe off the screen after this with a dry cloth, then, if there are still small marks on your screen use a small bit of isopropyl alcohol on a Q-tip to clean them.
Can a projector screen be too big?
Most definitely. You need to correctly measure your room’s width and depth and need to know (most importantly) your seating distance and aspect ratio. By knowing these, you know how big your screen should be to help you not succumb to headaches, eyestrains, fatigue, and more.
Do you need a dedicated theater room?
No. Most people can’t afford a dedicated theater room. It is recommended that you find the darkest room you can to prevent the most ambient light as possible - preferably no ambient light at all - and put your projector in there. That is where you will get the best pictures possible.
Where do you hang/put up a projector screen?
You’ll most likely want to hang it on a wall or ceiling / put it in front of a wall that receives no direct sunlight in front of your furniture in a room with little or no ambient light.
The darker the viewing environment the better. You’ll want to know your screen’s size and height, viewing distance, and seating distance just to make sure it fits and is good to put in that area.
Can you put a projector screen in front of a window?
The answer to this depends on the circumstance. If you don’t have blinds blocking the light, no. You do not want any light hitting your screen in any way. That and heat alone from sunlight or radiators below can end up stretching your screen and giving it weird oddities.
If you plan to block out that window entirely when using it, such as with blinds or some type of black block out material behind the screen then yeah, that works, but this still isn’t recommended.
Most people prefer pull-down screens in this situation so that your screen won’t always be in the way if you want to open the blinds or window, but this is up to you.
How do you put up a projector screen?
Most, if not all, projector screens come with instructions on how to put them up. You’re going to want either use a wall- or ceiling-mount, screws, and a level to make sure that your projector screen is level when you screw it into the mount.
It will be best to have another person to help you put up the projector screen and screw in one end of a projector at a time.
By following the instructions that come with the screen and maybe watching some videos like this one (which not only shows you how to hang a screen but also how to make one):
you’ll be able to easily hang up your screen.
In Conclusion
Projector screens are the best ways to view your projector’s images today. Whether you’re looking for an inexpensive one, the best of the best, or just one for gaming, you’re sure to find one on this list that speaks to you in some way.
And even if you don’t, using our extensive FAQ and Buyers’ Guide will push you in the right direction to your best choice.
Sources
- Abt Electronics, Projector Screen Buying Guide, YouTube, Mar 9, 2018
- Projector Screen Store, Projector Screen Buying Guide, 2019
- Michael Antonoff, Projector Screens Buying Guide, B & H Foto & Electronics Corp., 2016
- Silver Ticket Products, My Screen Material is Dirty, 2019
- wikiHow Staff, How to Clean a Projector Screen, WikiHow, March 29, 2019

My name is Steve Scott. Father of 2 and owner of Outdoor Movie HQ. I’ve been involved in the A/V industry for most of my life and built this blog to help people better understand projector technology. Please leave a comment if you have any questions.